Technical strictness and design, a Italian requirement, a uncompromising essential combination
|
Type Integrated amplifier Output power 100W p.c. @ 8 Ohm, 0.3% THD; 125W p.c. @ 4 Ohm, 0.3% THD; 195W p.c. @ 2 Ohm, 0.3% THD Output stage gain 26dB Frequency Response 3Hz-2MHz (+0/-3dB) Noise floor -89dBV (linear, 0-30kHz) Signal-to-noise ratio 116dB (linear, 0-30kHz) THD 0,02% (right before clipping) Line stage Imputs phono MM/MC, single-ended line (4), balanced line Output single ended line, balanced line, tape out Max. output voltage 3.5Vrms |
Gain 12dB Frequency response 3Hz-350kHz (@1Vrms measured at pre out Noise floor -90dBV (linear, 0-30kHz) Signal-to-noise ratio 102dB (linear, 0-30kHz) THD 0,04% (@ 3,5Vrms) Input impedance 47kOhm (single-ended); 100kOhm (balanced) Output impedance 80 Ohm (single-ended); 160 Ohm (balanced) Phono stage Gain 40dB (@ 1kHz, MM); 60dB (@ 1kHz, MC) Frequency response RIAA +/-0.5dB (16Hz-30kHz) |
Signal-to-noise ratio 82dB (linear, 0-30kHz, MM) Input impedance 47kOhm (MM); 100 Ohm (MC) Supply 115V or 230V, 50-60Hz Power consumption 47kOhm (MM); 100 Ohm (MC) Weight 28 Kg |
Tube and bipolar transistor hybrid stereo preamplifier. The line stage of the Talia stereo preamplifier makes use
of no coupling capacitors on the signal path, even though it is based on vacuum tubes. This layout avoids signal
degradations and allows for a very large bandwidth at both ends. The circuit is auto-balancing and allows for
amplification of both single-ended and balanced signals.
Phase can be chosen between direct and inverting for each channel by a key on the remote control with elegant and innovative look. This feature is most useful when reproducing records which have been recorded with inverted phase. A second phase inversion performed on the preamp restores the original absolute phase of the musical signal.
The phono stage features a integrated circuit, high performance MC input, suitable for almost all the most sought-after MC cartridges today available on the market. The MM stage features a ultra-low noise FET on the input and offers high matching flexibility. Great care has been devoted to the power supply, which sports a two-stage regulation for each stage of each channel and makes use of discrete-components, very low noise shunt regulators.
Phase can be chosen between direct and inverting for each channel by a key on the remote control with elegant and innovative look. This feature is most useful when reproducing records which have been recorded with inverted phase. A second phase inversion performed on the preamp restores the original absolute phase of the musical signal.
The phono stage features a integrated circuit, high performance MC input, suitable for almost all the most sought-after MC cartridges today available on the market. The MM stage features a ultra-low noise FET on the input and offers high matching flexibility. Great care has been devoted to the power supply, which sports a two-stage regulation for each stage of each channel and makes use of discrete-components, very low noise shunt regulators.
|
Type stereo preamplifier with “DC-coupled wideband tube interface” line stage circuit and MM/MC phono input Circuit Totally balanced circuit with 4 sections volume potentiometer, auto-balance feature to transform single-ended signals into balanced signals. Supply ultra-low noise toroidal transformer, comprehensive regulation of every stage’s supply. Audio inputs Phono (MM/MC, RCA), 3 line single-ended (RCA), 1 line balanced (XLR) Audio outputs Tape out (RCA), pre out single-ended (RCA), pre out balanced (XLR) |
Services Trigger in (jack 3,5mm, 12VDC - 50mA),Trigger out (jack 3,5mm, 12VDC - 250mA max.), remote in (led IR, jack 3,5mm) Frequency response 5Hz-300kHz (1Vrms out, +0/-1dB) Slew rate >60V/us (4Vpp out) Signal-to-noise ratio line 90dB (linear, ref. 5Vrms out, 20Hz-20kHz); MM 86dB (linear, ref. 5mVrms in, 1kHz, gain 40dB); MC 76dB (linear, ref. 0.5mVrms in, 1kHz, gain 60dB) Harmonic distortion line 0,01% (1 Vrms) Intermodulation line 0,04% (1 Vrms, 15kHz + 16kHz) |
Stability Intrinsic absolute (single-pole circuit) Gain line 12dB; MM variable 36-42dB, MC variable 55-65dB Input impedance line 47 kOhm (single-ended), 100 kOhm (bilanciato); phono 22 kOhm / 47kOhm (MM), 10-100-1000 Ohm (MC) Power consumption 130VA Size L cm 42 x H 15 x P 45 Weight 14,5 Kg |
Stereo power amplifier with “infinite slew” current transfer circuit and “quiet overload” protections.
the power stage is based on a topology in which the input signal is translated into a current which is amplified and
then fed to the load connected to the output.his amplification method allows for the overcome of the typical limitations
of voltage amplifiers.
Particularly, it is most effective on high power transient response, due to the absence of the slew effect. The use of the current transfer circuit delivers amazing dynamics, an absolute tonal coherence at all listening levels and an easy match with every kind of speakers.
The Tersicore stereo power amplifier is provided with both balanced and single-ended inputs, the latter with both non-inverting and inverting facility. This allow for easy bridge connection of two monoblocks and absolute phase restoring when using an inverting preamplifier. This feature gives the user the possibility to always listen to the music with its original phase.
Particularly, it is most effective on high power transient response, due to the absence of the slew effect. The use of the current transfer circuit delivers amazing dynamics, an absolute tonal coherence at all listening levels and an easy match with every kind of speakers.
The Tersicore stereo power amplifier is provided with both balanced and single-ended inputs, the latter with both non-inverting and inverting facility. This allow for easy bridge connection of two monoblocks and absolute phase restoring when using an inverting preamplifier. This feature gives the user the possibility to always listen to the music with its original phase.
|
Type bipolar transistor stereo power amplifier Circuit “infinite slew” current transfer circuit and “quiet overload” protections Supply ultra-low noise toroidal transformer. Ultrafast, soft recovery rectifiers; non-inductive fuses for semiconductors Audio inputs non-inverting single-ended (RCA), inverting single-ended (RCA), balanced (XLR) Audio outputs speaker (binding posts suitable for bananas, spades, lugs) |
Services trigger in (jack 3,5mm, 12VDC-50mA), trigger out (jack 3,5mm, 12VDC-250mAmax.) Output power 100W @ 8 Ohm, 200W @ 4 Ohm,350W @ 2 Ohm (continuous, 10Hz-300kHz) Frequency response 5Hz-400kHz (150W @ 8 Ohm, +0/-1dB) Slew rate >160V/us (100Vpp @ 8 Ohm) Signal-to-noise ratio 115dB (linear, ref. 36Vrms out, 20Hz-20kHz) Harmonic distortion 0,003% (1W @ 8 Ohm) |
Intermodulation 0,012% (1W@ 8 Ohm, 15kHz + 16kHz) Stability intrinsic absolute (single-pole circuit) Gain 20x (26dB) Input impedance 47 kOhm (single-ended), 100 kOhm (balanced) Power consumption 700VA Size L cm 37 x H cm 16 x P cm 47 Weight 23,5 Kg |
Monoblock power amplifier with “infinite slew” current transfer circuit and “quiet overload” protections.
The power stage is based on a topology in which the input signal is translated into a current which is amplified and
then fed to the load connected to the output. his amplification method allows for the overcome of the typical limitations
of voltage amplifiers. Particularly, it is most effective on high power transient response, due to the absence of the sew effect.
The use of the current transfer circuit delivers amazing dynamics, an absolute tonal coherence at all listening levels and an easy match with every kind of speakers. The Janus monoblock power amplifier is provided with both balanced and single-ended inputs, the latter with both non-inverting and inverting facility.
This allow for easy bridge connection of two monoblocks and absolute phase restoring when using an inverting preamplifier. This feature gives the user the possibility to always listen to the music with its original phase.
The use of the current transfer circuit delivers amazing dynamics, an absolute tonal coherence at all listening levels and an easy match with every kind of speakers. The Janus monoblock power amplifier is provided with both balanced and single-ended inputs, the latter with both non-inverting and inverting facility.
This allow for easy bridge connection of two monoblocks and absolute phase restoring when using an inverting preamplifier. This feature gives the user the possibility to always listen to the music with its original phase.
|
Type bipolar transistor stereo power amplifier Circuit “infinite slew” current transfer circuit and “quiet overload” protections Supply ultra-low noise toroidal transformer. Ultrafast, soft recovery rectifiers; non-inductive fuses for semiconductors Audio inputsAudio inputs non-inverting single-ended (RCA), inverting single-ended (RCA), balanced (XLR) Audio outputs speaker (binding posts suitable for bananas, spades, lugs) |
Output power 150W @ 8 Ohm, 300W @ 4 Ohm, 500W @ 2 Ohm (continuous, 10Hz-300kHz) Frequency response 5Hz-400kHz (150W @ 8 Ohm, +0/-1dB) Slew rate >160V/us (100Vpp @ 8 Ohm) Signal-to-noise ratio 115dB (linear, ref. 36Vrms out, 20Hz-20kHz) Harmonic distortion 0,003% (1W @ 8 Ohm) Intermodulation 0,012% (1W@ 8 Ohm, 15kHz + 16kHz) |
Stability Intrinsic absolute (single-pole circuit) Gain 20x (26dB) Input impedance 47 kOhm (single-ended), 100 kOhm (balanced) Power consumption 625VA Size L cm 27 x H cm 14,5 x P cm 43 Weight 14 Kg |
